Configuration
Avira GmbH
Avira AntiVir UNIX Server
39
Configuration file avsamba.conf
If you have installed the AntiVir Samba Scanner on your file server, you can configure this
module, instead of the on access AntiVir Guard, in the
avsamba.conf
file. The settings
made in this file apply to all scanner processes connected to the Samba service via samba-
vscan.
The eventual (AntiVir-specific) settings made in the configuration file
vscan-antivir.conf
override the specifications in
avsamba.conf
. It is however recommended to use the
configuration file
vscan-antivir.conf
only for Samba or samba-vscan specific settings, while
the settings for AntiVir should be edited in
avsamba.conf
.
The following keywords can be used in
avsamba.conf.
Please refer to the section about
Configuration File avguard.conf
, for the description of these commands:
EmailTo
,
Suppress...
,
LogFile
,
Syslog...
,
Detect...
,
Heur...
,
Archive...
,
Repair...
,
LogOnly/Rename.../Move...
,
ScanMode
.
4.3
Configuration Script
You can conveniently set up AntiVir Internet Updater using the configuration script,
which is able to intercept possible invalid entries and restart the necessary processes.
The procedure for using the script is very easy. If you want to configure the Internet
Updater:
Type:
/usr/lib/AntiVir/configantivir
The script reads the current settings in
avupdater.conf
and systematically asks if you want
to enter new values. It displays the possible parameters, while the current ones are shown
as default.
If you want to keep one of the current settings:
Press Enter.
If you want to change a setting:
Type the new value and confirm with Enter.
Finally, a summary of the configuration settings is displayed and you have to confirm the
configuration:
If you do not agree with all displayed options:
Type N to restart the configuration script and correct the values.
If all settings correspond to the configuration you require:
Confirm with Y or Enter to save the configuration file with the new values.
AntiVir Configuration
=====================
Here are the configuration settings you have specified. Look them over
to make sure they are correct.
email notification: no
specific logfile: /var/log/avupdater.log
update frequency: every 2 hours (if update daemon is running)
http proxy server: none
available options: y n
Save configuration settings? [y]
