21
Note:
The IP address to be added cannot be same as that of other computers or devices. The existence
of this IP address needs to be verified before adding.
2.
Confirm Access
Click “Start” and select “Operation”. Input “cmd” as shown in the picture below to verify whether the
network segment has been successfully added.
Click “OK” and open the DOS command window. Input ping: 192.168.5.26, and press “Enter”. If the
message below shows, it means that network segment is added successfully.
Summary of Contents for AV-1082G
Page 6: ...6 2 Ceiling mount...
Page 7: ...7...
