Ref#92550216001
System
The system section allows you to make changes to the network information of
the 9255. This includes changes to the IP Address, Gateway, Subnet Mast, and
DNS. In additional under the system section you will also find other features
including SNMP, Telnet, DHCP, Beeper configuration and more.
functionality
Telnet:
Enable or Disable Telnet functionality
IP Address:
IP Address of the
9255 device.
Subnet Mask:
The subnet mask
information can be populated
here
Default Gateway:
Enter the
gateway for the router.
DNS:
Enter the DNS information
here.
Note: Not having the correct DNS
information will affect the NTP
and SMTP mail server.
SNMP:
Enable or Disable SNMP
DHCP:
This will enable or disable the DHCP on the device
Beeper:
This will enable or disable the beep on the device
CGI Command:
This will enable or disable the http commands for the 9255
Delay Switch
: The Delay switch will delay the device to activate the command to
a designated amount of time. If set to 10 seconds after commands during
scheduler or http commands are sent there will be a 10 second delay.
Device Name
: Select the name for the device here, and this name will be used
for registering the device on IP Service.
Firmware:
Will provide information on the current firmware for the device
DDNS
The DDNS Setup allows the user to setup the 9255 with a DDNS server. This
way instead of having to remember long IP Addresses, the user now can easily
use a WWW link to connect to the device. This also is a good solution for users
to have a dynamic IP Address where the IP continually changes and is not
constant.
- 22-