Aviosys 9070CS-PoE User Manual Download

Page: 45 / 53

Alarm

Enable Alarm

Enable Alarm – Lost Ethernet Connection: Save into

SD Card:

When Ethernet connection is lost the device will automatically save into the SD card. Saving a backup.

Enable Alarm - Upload

FTP

When motion is detected, the IP Kamera 9070 will upload the video file to the selected FTP server.

SD Card

Enable Alarm - Save Into

When motion is detected, the IP Kamera 9070 will upload the video file to the SD card.

Enable Alarm – Save

SMTP

When motion is detected, the IP Kamera 9070 will send the video file to in a E-mail format.

Recording Time

: Set the duration of time you would like the IP Kamera9070-CS PoE to record when alarm

is set off.

Enable Alarm Recording Buffer:

The alarm recording buffer allows the camera to the selected amount of

buffer time before an alarm has been detected. This allows the IP Kamera9070-CS PoE to start recording
before any incident has occurred..

45-

Ref#90020326K0709

Summary of Contents for 9070CS-PoE






















































Search results

Summary of Contents for 9070CS-PoE

Reviews:

Related manuals for 9070CS-PoE

Brands by name

Popular brands

Aviosys 9070CS-PoE, User Manual

Search results

Summary of Contents for 9070CS-PoE

Reviews:

Related manuals for 9070CS-PoE

Brands by name

Popular brands