7.) Controlling the Device
CGI HTTP Commands
Http commands allow you to control the device with commands. The basic commands are provided below.
There are two ways to input http commands with authorization required
Password in http:
http://login:password@ipaddress:port/command
Password not in http:
http://ipaddress:port/command
Note: If you use the password not in http: command you will need to enter it when the browser asks
for the password.
Snapshot Command:
The snapshot command takes a snapshot of the camera in the current view.
http://ipaddress:port/snapshot.cgi
Ex. http command:
http://192.168.100.50:85/snapshot.cgi
Change Name:
This command allows you to change the name of the IP Kamera9070-CS PoE
http://ipaddress:port/vb.htm?cameratitle=
name
Ex. http command:
http://192.168.1.192/vb.htm?cameratitle=test_907011
Change IP Address:
This command allows you to change the IP Address of the IP Kamera9070-CS PoE
http://ipaddress:port/vb.htm?internetip=
ipaddress
Ex. http command:
http://192.168.1.192/vb.htm?internetip=192.168.1.191
Change Port:
This command allows you to change the Port of the IP Kamera9070-CS PoE
http://ipaddress:port/vb.htm?httpport=
portnumber
Ex. http command:
http://192.168.1.192/vb.htm?httpport=1025
Change Subnet Mask:
This command allows you to change the Subnet Mask of the IP Kamera9070-CS PoE
http://ipaddress:port/vb.htm?subnetmask=
subnetmask
-
48-
Ref#90020326K0709
Summary of Contents for 9070CS-PoE
Page 18: ... 18 Ref 90020326K0709 ...
