Aviom A-16 Personal Monitor Mixing System
34
35
device capable of recording and storing the sysex data.
•
MIDI In
is used to send recorded sysex messages from a storage
device back into the A-16R
•
MIDI Thru
can be used to daisy-chain MIDI devices. The Thru jack
carries a copy of the data appearing at the A-16R MIDI In port.
A-Net In and Out
The A-Net connections on the rear of the A-16R connect the A-16R to your audio
network. The
A-Net In
jack accepts signals coming from the A-16T Transmitter,
another A-16R, an A-16 Personal Mixer, or from an A-16D A-Net Distributor.
The
A-Net Out
jack can be used to start a daisy-chain connection. By connecting a
single standard Cat-5 cable from the A-Net Out jack of the A-16R to the A-Net In of
another A-Net compatible device, you can expand your audio network endlessly.
The A-16CS Control Surface
Overview
The A-16CS Control Surface is an optional accessory than can be used with the
A-16R Personal Mixer. The button layout of the A-16CS is the same as found on the
original Aviom Personal Mixer, the A-16.
The main differences between the A-16 Personal Mixer and the A-16CS Control
Surface are on the rear panel. The A-16CS has no audio outputs. Also missing are the
A-Net In and Out connections. Instead, the A-16CS rear panel contains the A-Control
connection for communication with the host A-16R and a footswitch jack.
The functions of the front panel buttons and knobs are the same as on the A-16R and
original A-16 Personal Mixers. For example, to recall a User Preset mix, you will
still press the
R
ECALL
button, and then select one of the numbered buttons to select a
saved mix.
The following descriptions detail the functions of the modes and functions of the
A-16CS.
Note
: Remember that the A-16R front-panel Remote/Local switch must be in the
Remote position in order for button presses and knob motions on the A-16CS
to be recognized by the host.