Zooming and Focusing the Dome Camera
Ensure this procedure is performed after the dome cover is installed, so you can accommodate for the focus
shift caused by the dome bubble.
l
In the camera web browser interface or the Avigilon Control Center software, use the camera’s Image
and Display settings to zoom and focus the camera.
a. Use the zoom buttons to zoom the camera in or out.
b. Click
Auto Focus
to focus the camera.
c. If the preferred focus was not achieved, use the focus near and far buttons to adjust the focus.
Configuring the Camera
Once installed, use one of the following methods to configure the camera:
l
If you have the USB Wifi Adapter, you can access the mobile web interface to configure the camera. For
more information, see
Avigilon USB Wifi Adapter System User Guide
.
l
If you have installed multiple cameras, you can use the Avigilon Camera Configuration Tool to configure
common settings. For more information, see the
Avigilon Camera Configuration Tool User Guide
.
l
If the camera is connected to the Avigilon Control Center, you can use the client software to configure
the camera. For more information, see the
Avigilon Control Center Client User Guide.
l
If the camera is connected to a third-party network management system, you can configure the camera's
specialty features in the camera's web browser interface. For more information, see the
Avigilon H.264
Web Interface User Guide.
l
If you installed an H4 ES camera, you can use the Avigilon Control Center Client software to configure the
camera and the embedded software.
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Avigilon Control Center™ Client User Guide
l
Avigilon™ High Definition H.264 Web Interface User Guide
l
Avigilon™ Camera Configuration Tool User Guide
l
Avigilon™ USB Wifi Adapter System User Guide
The manuals are available on the Avigilon website:
http://www.avigilon.com/support-and-downloads
Zooming and Focusing the Dome Camera
23
