Mounting the Dome Camera to the Pendant NPT Mount
NOTE:
This procedure requires a 1-1/2” NPT-female to NPT-female pipe adapter. It is recommended that the
pendant NPT mount is mounted to a 1-1/2” conduit pipe.
1. Pull the required cables through the NPT conduit pipe.
2. Apply thread seal tape to the pipe and screw on the 1-1/2” NPT female to NPT female pipe adapter.
3. Screw the locking ring onto the pendant NPT mount
4. Apply thread seal tape to the pendant NPT mount and screw it into the pipe adapter.
Mounting the Dome Camera to the Pendant NPT Mount
17
