on the next page and
Installing the Surface Mount with a Rear Conduit
on page 16.
l
Surface mount to an electrical box. See
Installing the Surface Mount to an Electrical Box
on page 18.
l
Surface mount to a door mullion. See
Installing the Surface Mount to a Mullion
on page 21.
Installing the Surface Mount with a Bottom Conduit
Important:
Conduit installations only support a 1/2" conduit.
NOTE:
The following procedure uses a conduit with a bare end. If a conduit with a nut on the end is used, fasten
the conduit to the surface mount adapter using the nut after you have connected the conduit to the surface
mount.
If installing surface mount with cable conduit (not provided):
1. Pull cables through the conduit.
2. Place the mounting template on the mounting surface so the top of the conduit aligns with the marked
conduit offset.
3. Use the mounting template to drill 4 holes in the correct locations and install the screw anchors.
4. Remove the blanking plate from the bottom of the surface mount adapter and replace with the conduit
plate.
Installing the Surface Mount with a Bottom Conduit
13
