Surface Mount Adapter View
Figure 3: Note:
The bottom conduit entry (5) is covered by a blanking plate that is not shown in the above view. This blanking plate must be replaced
with the conduit plate for bottom conduit installations.
1.
Camera mounts
Points for mounting the Video Intercom body to the surface mount.
2.
Cable entry holes
Two entry holes, left side or right side, for the cables required for camera operation.
3.
Mounting holes
Holes for mounting the surface mount adapter to the following:
A. UK standard single gang box
B. Octagon gang box
C. 4" gang box
4.
Rear conduit entry
Used to connect a cable conduit to the surface mount adapter from the rear.
5.
Bottom conduit entry
Used to connect a cable conduit to the surface mount adapter from the bottom.
Surface Mount Adapter View
11
