Avigilon ENC-4PORT, Operating And Installation Instructions, Page: 4 / 24

4
Important Safety Information
This manual provides installation and operation information and precautions for the use of
this equipment. Incorrect installation could cause an unexpected fault. Before installing
this equipment read this manual carefully. Please provide this manual to the owner of the
equipment for future use.
This symbol indicates the presence of dangerous voltage within and outside
the product enclosure that may constitute a risk of electric shock, serious
injury or death to persons if proper precautions are not followed.
This symbol alerts the user to the presence of hazards that may cause minor
or moderate injury to persons, damage to property or damage to the device
itself if proper precautions are not followed.
Warning
– Failure to observe the following instructions may result in severe injury
or death.
Do not use the encoder near water or expose the encoder to dripping or splashing. Do
not place objects filled with liquids, such as vases above the encoder.
Do not expose the encoder to rain or moisture.
This encoder is designed for indoor use only away from moisture, corrosive vapors,
and explosions. For outdoor or hazardous environments, install the encoder inside a
protective housing rated to withstand rain, sleet, snow, ice, corrosive vapors, explosions
or other weather or hazardous conditions that the encoder may be exposed to at the
location.
Installation of this encoder must be performed by qualified personnel only and conform
to all local codes.
Use only installation methods and materials capable of supporting four times the
maximum specified load.
Only power the encoder using a Class 2 or Power over Ethernet power supply that is UL
Listed, CSA approved, or bears the CE mark.
Do not connect the encoder directly to mains power for any reason.
•
•
•
•
•
•
•