1. Determine the position you want the DIN rail bracket attached to the mounting plate.
2. Align the DIN rail bracket to the pre-drilled threaded holes at the correct orientation on the mounting
plate and attach using the 4 (four) flat-head screws provided in the plastic bag labeled
DIN rail#1
. The
tabs on the back of the of the appliance fit into the slots on one side of the bracket only.
j
Indicates the tabs on the mounting plate which fit in to the slots on the rear of the appliance.
k
Indicates the top edge of the DIN mounting bracket.
The example orientation places the appliance on the mounting bracket so that the front of the
appliance is facing up.
Mounting an ACC ES Rugged 8-Port Appliance
12