Avigilon 12W-H3-4MH-DO1 Installation Manual Download Page 16 | Manualshive

Page: 16 / 26

Avigilon 12W-H3-4MH-DO1 Installation Manual Download Page 16

2. To aim the camera, adjust each of the available camera heads as required:

a. Press the rail release tab to move the camera head side to side.

b. Loosen the tilt lock screws to tilt each camera head up and down. Lock the screws when the

camera is tilted in the correct angle.

c. Rotate the azimuth control ring to set the image in the correct rotation.

3. In the camera web browser interface, adjust the camera’s Image and Display settings to achieve the

desired zoom position.

Installing the Dome Cover

1. Attach the dome cover to the base by tightening the screws with the provided Torx key.

2. Remove the plastic cover on the dome bubble.

For More Information

Additional information about setting up and using the device is available in the following guides:

l

Avigilon™ Control Center Client User Guide

l

Avigilon™ High Definition H.264 Web Interface User Guide

The manuals are available on the Avigilon website:

http://avigilon.com/support-and-downloads

Installing the Dome Cover

11

«
...
14
15
16
17
18
...
»

Summary of Contents for 12W-H3-4MH-DO1



























Reviews:

No comments