3. Push the camera into the base. The Connection Status LED should turn on if there is power going to the
camera.
If the Connection Status LED does not turn on, remove the camera module and check the connections on
the base.
4. Tighten the screws on the camera module to fix it to the base.
Assigning an IP Address
The camera automatically obtains an IP address when it is connected to a network.
NOTE:
If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
l
Camera's web browser interface: http://
<camera IP address>
/
l
ARP/Ping method. For more information, see
Setting the IP Address Using the ARP/Ping Method
on
page 17
l
Network Video Management software application (for example, Avigilon™ Control Center).
NOTE:
The default camera username is
admin
and the default password is
admin
.
Assigning an IP Address
9