Avidyne Envision EX5000, Pilot'S Manual, Page: 106 / 142

Reference
Envision EX5000 -94- 600-00151-001 Rev 01
XM WX Satellite Weather will activate your receiver by sending a
unique activation code to your receiver. This code is valid for 24
hours after your call.
To complete and verify the activation:
1) Move your aircraft outside to an area with a clear view of the sky.
2) Power up both the EX5000 and the Broadcast receiver and wait
at least an hour to allow the receiver to receive the activation
signal.
3) When your receiver receives the activation code from XM, the
EX5000 will display information on the following EX5000 pages:
n
Trip page - will display METARS, TAFS, Winds Aloft,
freezing level forecast, and time since reception for all
weather products.
n
Map page - will display weather, including datalink radar
data, satellite-provided lightning, storm cells, and METARs
through the use of the METAR symbology
n
Nearest page - will display METARS through the use of the
METAR symbology.
For problems relating to your receiver, contact Heads Up
Technologies:
E-mail: service@heads-up.com
Phone: (972) 980-4890 Ext. 142.
Note : If 24 hours pass before you can get to your aircraft, contact
XM Satellite Radio's Listener Care Center again or visit www.xmra-
dio.com/activation to enter your receiver ID number to enable the
activation code for your receiver for an additional 24 hours.
Note : The EX5000’s Service Level indication may take several
flights to synchronize to the correct level but you will still receive and
see the weather products you have purchased.
Note : Contact Heads Up Technologies for problems relating to your
receiver or assistance with service.
e-mail:
service@heads-up.com
Phone: (972) 980-4890 Ext. 142