11
Attaching the stand to the loudspeaker is most
easily done by turning the stand upside down,
and carefully lowering it onto the bottom of the
loudspeaker. Ensure that the anodised legs
locate fully into the shallow recesses in the top
of the stand.
It is highly recommended that at least two
people carry out this step
Once the stand is correctly located, attach the
stand securely using the six 40mm M6 bolts
removed in step 1.
IMPORTANT
Ensure all six of these bolts are
secure before moving onto the next stage.
Once all the screws are in place, the whole assembly can be
carefully rolled over to its correct vertical orientation, and placed in
its final position. Place some soft material under the loudspeaker
during this procedure to avoid damaging the finish. Please take care,
