10
Take the plinth you previously
removed from the loudspeaker
and bolt it to the top of the pillars
(ensuring that the anodised
deflector is pointing upwards),
using the four 15mm M6 bolts (C)
supplied. Ensure they are done
up tightly—there should be no
movement between the plate
and the pillars.
Note the position of the anodised
deflector (shown in green)—this
defines the rear of the stand
when attaching the speaker (it
will align with the port on the
bottom of the loudspeaker
cabinet). Failure to ensure this
will result in damaging both the
deflector and the bottom of the
loudspeaker cabinet—please take
care!
