Avid Technology Xpand!, Manual

Page: 17 / 38

Chapter 3: Operate Xpand! 13
FX (Effects) Page
Xpand! provides two FX (effects) per instance.
Send controls for each Part are located on the
Mix and FX pages.
On/Off
Click the button to activate or deactivate the ef-
fect. The button is lit when the effect is acti-
vated.
Type
Click the FX type display to select an effect from
the pop-up list.
Parameters 1 & 2
Edit the selected effect by two parameters. The
parameters are varying and depend on the type
of effect.
To FX1 (FX2 Send to FX1)
This control lets you send a percentage of the
FX2 output signal into FX1, instead of directly
to the output. At 0%, no signal is sent to FX1. At
100%, all of the FX2 output signal is sent to FX1.
See Appendix D for a list of all Effects and
their available parameters.