3
3
Loosen the captive thumbscrew securing each card to the chassis.
4
Loosen the two captive thumbscrews securing the front of each card to the front of the IO unit.
5
Carefully slide each card out of its slot.
To get it started, gently push the back of the card towards the front of the unit, then gently pull each card out from the front and set
them on your padded work surface. Do not stack the cards on top of each other.
6
Carefully cut all cable ties bundling the two cable harnesses together and/or securing the harnesses to the bottom of the chassis.
• Some cable ties must be accessed from the back of the chassis, while others from the front.
Figure 5. Loosening captive thumbscrews
Figure 6. Loosening front panel captive thumbscrews
Figure 7. Cable ties, viewed from the front of the Stage 64
