Avid Technology Mojo DNA, Manual, Page: 7 / 28

Avid Mojo DNA Front and Rear Panel
7
Avid Mojo DNA Rear Panel
Figure 3 shows the connections on the rear of the Avid Mojo DNA, while
Table 2 describes the function of each connector. The rear connectors are
labeled on the device.
Figure 3 Avid Mojo DNA Rear Panel (SD video and Audio Boards)
Although not labeled as a Component connection, you can connect a
custom cable to the S-Video and Composite input connectors that allows
you to input a Component signal into the Avid Mojo DNA. The same cable
can be used to output a Component signal when connected to the S-Video
and Composite output connectors. Connectors are described in
Table 2 .
Host
DV
Ref
Video
Audio Audio Video
DC
IN
Input Output
Host
DV
Ref input S-Video
input
Composite video
input (yellow)
Audio output
(left, white)
Audio output
(right, red)
Composite video
output (yellow)
S-Video
output
DC In Audio input
(left, white)
Audio input
(right, red)
Table 2 Avid Mojo DNA Rear Connectors
Label Function
Host A 6-pin 1394 connector used to input and output audio and
video signals to and from the Avid editing system
DV A 4-pin 1394 connector used for input and output to and from
a DV camera or deck and the Avid Mojo DNA
REF Input An RCA connector that provides a connection of a black burst
or house sync input; synchronizes decks that are part of the
system