Connecting Peripheral Equipment
13
Connecting a Client Monitor
To view the video as it passes through the Avid Mojo DNA, you might
want to connect a monitor. You have two options:
•
Most video decks provide a video output connector. You can connect a
monitor to the deck to see the video sent to the Avid Mojo DNA or the
video the Avid Mojo DNA sends to the deck. See your video deck
manufacturer’s documentation for more information.
c
The video you see in the monitor connected to the deck might not
indicate there is a video signal going to the Avid Mojo DNA.
•
You can see the input and output video signals passing through the
Avid Mojo DNA using the Composite video output connector on the
rear of the unit. Connect a composite monitor to the connector
identified in
.
Figure 6
Connecting a Composite Monitor
Connecting a Video Deck — Component Signal
An optional component video deck connection requires the following:
•
Two Avid Mojo DNA component video cables
•
A video deck with component inputs and outputs
Host
DV
Ref
Video
Audio
Audio
Video
DC
IN
Input
Output
Composite video output
Summary of Contents for Mojo DNA
Page 28: ...Using the Avid Mojo DNA 28...
