Avid Technology Eleven Rack, User Manual

Page: 26 / 124

Eleven Rack User Guide 18
PEDAL
Turn the lit Control knob to choose the param-
eter controlled by an external expression pedal,
if attached. The following choices are available:
Wah
Lets you control the sweep of the Wah ef-
fect.
Volume Pedal
Lets you control the sweep of the
Volume Pedal effect.
Rig Volume
Lets you control the overall Rig
volume.
Multi FX
Lets you control up to four different
amp and/or effects parameters at once. Press
FX-Sel for options. There are four pages of op-
tions, each one addressing one parameter that is
to be controlled.
On each page, set the device you want to control
and the parameter you want to sweep. The Toe
and Heel settings govern the range of the con-
trol that is able to be swept.
None No parameter will be affected when the
pedal is moved.
Signal Routing
The position of many of the devices in the signal
chain can be changed. The order that effects
units are plugged into each other can make a
large difference in the sound you get.
Most effects can be moved anywhere before or
after the amp and cabinet models. The FX Loop
can be moved to one of four places; the begin-
ning of the chain, before the amp and cab, after
the amp and cab, or before the final output.
To move an effect:
1
Turn the Scroll wheel to select the effect you
want to move.
1
Press SW2 to enter Move mode.
2
Turn the Scroll wheel to move the effect to a
different position in the signal chain.
3
Press SW2 again to keep the change, or SW1 to
cancel the move.
Controls Takes you to a page with additional
controls for the selected element. Press
Edit/Back to return to Rig View when you’re fin-
ished.
Move
Lets you move an effect or the FX loop to
a different point in the signal chain.
If you set the Heel number higher than the
Toe number, the control can be swept in re-
verse.
For information on how to toggle
Eleven Rack between expression pedal and
footswitch control, see “External Pedals” on
page 93.