8
AVID CONFIDENTIAL
Using the Setup Utility
DRAFT VERSION 12/13/01
Part 0130-#####-01 Rev. A
12. Press Enter to continue to the next prompt.
The IP default gateway prompt appears.
13. Press Enter to continue to the next prompt.
The Enable IP forwarding prompt appears
Enable IP forwarding? [y/n]
14. Type n and press Enter to disable IP forwarding.
The Routing Interface Protocol (RIP) supply prompt appears.
Enable RIP supply? [y/n]
15. Type n and press Enter to disable RIP supply.
The system prompts you to restart the Setup Utility or continue.
Would you like to run from the top again? [y/n]
16. Type n and press Enter to continue.
The Review changes prompt appears.
Review the changes made? [y/n]
17. Enter y to review the changes or n to continue without reviewing.
Press Enter. If you press y, go to step 19. If you type n and do not
apply the changes, the system prompts with:
Abort all changes? [y/n]
18. Enter y to discard the changes to flash memory, or n to return to
the Apply the changes? prompt.
19. Decide whether you want to make the changes permanent at the
following prompt:
Save changes to flash? [y/n]
20. Enter y to save your changes to flash memory, or n to continue
without saving the changes. Changes are normally saved.
Using the Boot Options Menu
To use the Boot Options menu, you must be logged in to the switch as
an administrator. The Boot Options menu allows you to select a
Alteon Switch.fm Page 8 Thursday, December 13, 2001 4:17 PM
