AVID CONFIDENTIAL
7
Part 0130-#####-01 Rev. A
DRAFT VERSION
12/13/01Using the Setup Utility
4. Enter the last two digits of the year using a number from 00 to 99.
“01” is considered the year 2001. To keep the current year, press
Enter.
The system displays the date and time settings.
5. Enter the hour of the current day using a number from 00 to 24. To
keep the current hour, press Enter.
6. Enter the minutes of the current hour using a number from 00 to
59. To keep the current minute, press Enter.
7. Enter the seconds of the current minute using a number from 00 to
59. To keep the current seconds, press Enter.
The system displays the date and time settings.
n
For each of the remaining steps, press Enter if you want to keep the current
settings.
The following prompt appears:
BootP Option:
Current BOOTP usage:Disabled
Enter new BOOTP usage [d/e]:
8. Type d to disable BOOTP and press Enter.
If available on your network, a BOOTP server can supply the
switch with IP parameters so that you do not have to enter them
manually. BOOTP must be disabled, however, before the switch
will prompt for IP parameters.
9. The Spanning Tree setting appears:
Spanning Tree:
Current Spanning Tree setting: ON
Turn Spanning Tree Off? [y/n]:
10. Type n and press Enter.
11. The Port Config setting appears:
Port Config:
Enter port number: (1-9)
Alteon Switch.fm Page 7 Thursday, December 13, 2001 4:17 PM
