background image

AVID CONFIDENTIAL

13

Part 0130-#####-01 Rev. A

DRAFT VERSION

 12/13/01Copyright and Disclaimer

Copyright and Disclaimer

Product specifications are subject to change without notice and do not represent a commitment on 
the part of Avid Technology, Inc. The software described in this document is furnished under a 
license agreement. You can obtain a copy of that license by visiting Avid's Web site at 
www.avid.com. The terms of that license are also available in the product in the same directory as 
the software. The software may not be reverse assembled and may be used or copied only in 
accordance with the terms of the license agreement. It is against the law to copy the software on any 
medium except as specifically allowed in the license agreement. Avid products or portions thereof 
are protected by one or more of the following United States patents: 4,746,994; 4,970,663; 
5,045,940; 5,063,448; 5,077,604; 5,245,432; 5,267,351; 5,309,528; 5,325,200; 5,355,450; 
5,396,594; 5,440,348; 5,452,378; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 
5,577,190; 5,583,496; 5,584,006; 5,627,765; 5,634,020; 5,640,601; 5,644,364; 5,654,737; 
5,701,404; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,731,819; 5,745,637; 
5,752,029; 5,754,180; 5,754,851; 5,781,188; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 
5,852,435; 5,883,670; 5,889,532; 5,892,507; 5,905,841; 5,912,675; 5,929,836; 5,929,942; 
5,930,445; 5,930,797; 5,946,445; 5,966,134; 5,977,982; 5,986,584; 5,987,501; 5,995,079; 
5,995,115; 5,999,190; 5,999,406; 6,009,507; 6,011,562; 6,014,150; 6,016,152; 6,016,380; 
6,018,337; 6,023,531; 6,023,703; 6,031,529; 6,035,367; 6,038,573; 6,052,508; 6,058,236; 
6,061,758; 6,072,796; 6,084,569; 6,091,422; 6,091,778; 6,105,083; 6,118,444; 6,128,001; 
6,128,681; 6,130,676; 6,134,379; 6,134,607; 6,137,919; 6,141,007; 6,141,691; 6,154,221; 
6,157,929; 6,160,548; 6,161,115; 6,167,404; 6,174,206; 6,192,388; 6,198,477; 6,208,357; 
6,211,869; 6,212,197; 6,215,485; 6,223,211; D352,278; D372,478; D373,778; D392,267; D392,268; 
D392,269; D395,291; D396,853; D398,912. Additional U.S. and foreign patents pending. No part of 
this document may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, including photocopying and recording, for any purpose without the express written 
permission of Avid Technology, Inc.

© 2001 Avid Technology, Inc. All rights reserved. Printed in USA.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial 
computer software” or “commercial computer software documentation.” In the event that such 
Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, 
all rights with respect to this Software and documentation are subject to the terms of the License 
Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Alteon Switch.fm  Page 13  Thursday, December 13, 2001  4:17 PM

Summary of Contents for Alteon 180















Reviews: