MX88PRO AV
Rear Panel
①
INPUT:
Eight type-A female HDMI input ports to connect HDMI sources.
②
AUDIO MATRIX OUT/ARC:
Eight 3-pin terminal blocks and eight Toslink
connectors to connect speakers or amplifiers for HDMI input audio de-embedding
or HDBaseT output audio de-embedding. The eight Toslink connectors can also
be used for ARC audio output from HDBaseT receivers. They can make up an
audio matrix to be controlled by front panel buttons, GUI or RS232 commands.
③
OUTPUT:
Eight HDBaseT RJ45 outputs to connect the eight HDBaseT receivers,
and eight local HDMI ports to connect local displays.
④
CONTROL:
⚫
RS232: 3-pin terminal block to connect the control device (e.g. PC) to control
the matrix switcher by RS232 commands.
⚫
IR REC: 3.5mm jack to connect IR receiver to control the matrix switcher by
the IR remote.
⚫
FW: Type-A USB port for firmware upgrade.
⚫
TCP/IP: RJ45 port to connect the control device (e.g. PC) to control the
matrix switcher by GUI.
⑤
RS232:
Eight 3-pin terminal blocks to control the third-party devices base on
RS232 pass-through feature. There is a one-to-one correspondence between the
eight RS232 ports and the eight RS232 ports of eight HDBaseT receivers.
⑥
IR IN:
⚫
1~8: Eight 3.5mm jacks to connect eight IR receivers. Each IR input is
associated with the respective HDBaseT output and cannot be switched
separately. It makes up a bi-directional IR transmission with the IR OUT on
the corresponding HDBaseT receiver.
⚫
ALL IN: 3.5mm jack to connect the IR receiver to transmit the IR signal from
the ALL IN port to all HDBaseT receivers.
RS232
Tx
Rx
FW
IR EYE
TCP/IP
1
2
3
4
5
6
7
8
ALL IN
1
2
3
4
5
6
7
8
ALL OUT
Tx
Rx
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
L
R
1
2
3
4
5
6
7
8
H
D
B
a
s
e
T
H
D
M
I
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
9
4
5
7
8
6
