AVG-UHMS66PRO
Command
Function
Feedback Example
Recall[Y].
Recall the preset command [Y].
Recall
From
FY
(Y=0-9)
Clear[Y].
Clear the preset command [Y].
Clear FY (Y=0-
9)
PWON.
Work in normal mode.
PWON
PWOFF.
Enter into standby mode and cut off the
power supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off
the
power
supply
to
HDBaseT
receivers, press other buttons or send
other commands to start.)
STANDBY
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output
(value: O); [X] is the number of the port,
if the value of X is ALL, it means all
ports; [Z] is for HDCP compliant status,
the value may be 1 (HDCP compliant)
or 0 (not HDCP compliant).
/%[Y]/[X]:[Z].
[x1]R[x2].
Transfer the IR signal from output
channel [x1] to input channel [x2].
IR: X1-> X2
(X1/ X2=1~6)
DigitAudioON[x].
Enable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, enable this port.
X=7, enable all the 6 ports.
DigitAudio ON with
[x]
x=1~6 or ALL
DigitAudioOFF[x].
Disable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, disable this port.
X=7, disable all the 6 ports.
DigitAudio OFF with
[x]
x=1~6 or ALL
Summary of Contents for AVG-UHMS66PRO
Page 42: ...AVG UHMS66PRO 7 Panel Drawing ...
