AVG-UHD4K-44 V2
5.5.3 RS232 Communication Commands
1)
“[“, “]” in the commands are for easy recognition only and not necessary in real
operations. Other symbols including “.”, “,”, “/”, “%”, “;”, “^”. are parts of the
commands.
2)
The feedback
listed in the column “Feedback Example” is only for reference,
feedbacks may vary according to different operations and firmware.
3)
Dial the EDID switcher to “1111” before sending commands pertaining to software
EDID management (with grey background). Refer to
5.3 EDID Management
for
detailed information.
System Commands
Command
Function
Feedback Example
/*Type;
Report product model.
UHD4K-44 V2
/^Version;
Report the firmware version.
Vx.x.x
Demo.
Switch to the “demo” mode, convert input
and output in turn like1B1, 1B2, …4B3,
4B4, 1B1… and so on .The switching
interval is 2 seconds.
Demo Mode
AV:01->01
AV:01->02
AV:01->03
AV:01->04
AV:02->01
…
Normal Mode
Undo.
Cancel the current operation.
Undo Ok!
PWON.
Power on system.
PWON
PWOFF.
Turn the system to standby mode, and then
send the command “PWON.” to start.
PWOFF
STANDBY.
Turn the system to standby mode, and then
press other buttons or send other
commands to start.
STANDBY
%9962.
Report the system standby status.
STANDBY/PWOFF/
PWON
%9964.
Report the IP address.
IP:xxx.xxx.x.xxx
%0911.
Factory Default.
Factory Default
Front Panel Lock/unlock Commands
Command
Function
Feedback Example
/%Lock;
Lock the front panel buttons.
System Locked!
/%Unlock;
Unlock the front panel buttons (Default).
System Unlock!
%9961.
Report the panel buttons locking status.
System Locked/ Unlock!
