AVG-UHD4K-44 V2
5. System Operation
5.1 I/O Connection Switching
The front panel features four input and output selection buttons for switching the I/O
connection.
1) To swicth one input to an output:
Operation: “input” + “output” + “ENTER”
Example: input 2 to output 4
INPUT:
OUTPUT:
2) To switch an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
INPUT:
OUTPUT:
Note
:
Indicators of the pressed buttons will blink blue three times if the switching is
successful, then turn off. If the switch fails, they will turn off immediately.
5.2 I/O Connection Query
Press and hold the button ENTER for 3 seconds to enter system enquiry mode, and
then press INPUT 3/4 to select previous/next item, press INPUT 1/2 to turn
previous/next page. The chart below shows information that can be inquired:
Function Items
Example
Description
Check the
connection status of
inputs
Y means the corresponding
port is connected with input
device, N means not.
Check the
connection status of
outputs
Y means the corresponding
port is connected with output
device, N means not.
Correspondence
between inputs and
outputs
Shows the correspondence
between the 4 inputs and 4
outputs.
Check if the input is
with HDCP
Y means the input signal is
with HDCP, N means not.
Check if the output
is with HDCP
Y means the output signal is
with HDCP, N means not.
