AVG-K12-VGA
5.6.3 Command Menu
In the setting menu, click
“
Command
” to access command settings menu as shown in
the below picture:
In this GUI, you can:
▪
Enter the RS232 commands for the projector in
Display On
/
Display OFF
/
Input
Select
boxes to turn on, turn off the projector and select the input on the projector.
▪
Select the
Hex
checkbox to set the format of commands as hexadecimal. The
default is ASCII.
▪
Modify the baud rate
for the projector’s RS232 protocol, the default value is 9600
and the selectable range is 2400~115200.
▪
Set the
Input Select Delay.
The default time is 5 seconds. The AVG-K12 will send
the command typed in
Display ON
box, wait 5 seconds, and then send the
command typed in the
Input Select
box.
▪
Please check the
device manufacturer’s manual for the correct command
terminator.
▪
Click “
Save
” to save these settings.
Note: For more details about commands for your display, please refer to the
display
’s user manual.