AVG-HDWP70HD
5. Operations
5.1. Operations of the front panel buttons
Press and hold the
SOURCE/AUTO
button for approximately 3 seconds. When the button lights
up green the transmitter is in AUTO mode. This mode automatically selects the last video source
connected to the transmitter and outputs it to the display. Press and hold again for approximately 3
seconds, the light will go out, and the device will be in Manual mode which will allow the user to
momentarily press the button to toggle between the two HDMI sources.
5.2. RS232 Control
There are two RS232 control modes switching via sending 50779% or 50780%.
①
Control this transmitter and a far-end third-party device (such as a LCD) device by local PC, as
per the connection diagram below:
