manualshive.com logo in svg

AVG AVG-TMX88PRO, Manual, Page: 31 / 41

Share
Download
AVG AVG-TMX88PRO Manual Download Page 31

AVG-TMX88PRO 

 

5.4 TCP/IP Control 

The AVG-TMX88PRO features a TCP/IP port for IP control. 

Default settings: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway: 
192.168.0.1; Port: 4001. 

IP & gateway settings can be changed as needed, the Port cannot be changed. 

Connect the Ethernet port of the control device and TCP/IP port of the AVG-
TMX88PRO and set the IP address in the same range of IP address of the matrix, 
users are then able to control the device via the web-based GUI or TCP/IP 
communication software. 

 

5.4.1 Control Modes 

The AVG-TMX88PRO can be controlled by a PC without Ethernet access or PC(s) 
within a LAN.

 

 

Controlled by PC 

Connect a computer to the TCP/IP port of the AVG-TMX88PRO and set its network 
address in the same address range as the default IP address of the matrix (Default: 
192.168.0.178). 

 

 

 

 

Controlled by PC(s) in LAN 

Connect the AVG-TMX88PRO, a router and several PCs to setup a LAN (as shown 
in the following figure). Set the network subnet of AVG-TMX88PRO to the same as 
the router’s, then PCs within the LAN are able to control the AVG-TMX88PRO. 

Same network 
subnet as the 
switcher 

Summary of Contents for AVG-TMX88PRO










































Reviews:

No comments