AVG-TMX88PRO
To convert an input to all outputs:
Example: Input 1 to all Outputs
→ Press INPUT 1 + ALL + ENTER
5.2.2 Controlling a Far-end Device Locally
Connect an IR receiver to the
IR IN
or the
COMMON IR
port on the switcher, and
use the IR Remote of the far-end device to control the device locally.
1 to 1: (through IR IN)
Connect an IR receiver with to the
IR IN
port of the AVG-TMX88PRO, users can
control a far-end output display via its IR remote from the Matrix location.
In this case, the IR signal is transferred via the cat cable. Only the corresponding
IR
OUT
port can emit control signals to the remote display.
See the figure below:
C
O
M
M
O
N
I
R
IR
C
O
N
T
R
O
L
HDMI OUT
HDBT IN
Tx
Rx
RS232
IR IN
IR OUT
PoC
Receiver
DVD
HDTV
IR Remote
HDTV
IR Transmitter