179
AVG 8.5 Anti-Virus Network Edition © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
To be able to send
Graphic reports
by e-mail or receive
notifications
, you need to
configure this tab first.
Note: The crucial fields to be filled are located in the Server for sending e-mails
(SMTP) section (see below). You will be allowed to select other fields (To/Subject/
Body) also during the Report Schedule Definition Wizard, but all values you will
enter here will be considered as default.
The Message header section contains these fields:
·
To - specify one or more e-mail addresses that the report(s) will be sent to.
Separate individual items by a comma. This field can also be filled during
Report Schedule definition.
·
Copy - An optional value. Specify one or more e-mail addresses that the
report(s) will be sent to. Separate individual items by a comma.
·
Blind copy - An optional value. Specify one or more e-mail addresses that
the report(s) will be sent to as a blind copy (no other recipients will see these
addresses). Separate individual items by a comma.
·
From - An optional value. Specify the sender's e-mail address and/or sender's
name and e-mail address in angle brackets <[email protected]>
·
Reply to - An optional value. Specify a reply e-mail address.
·
Subject - enter some text to recognize the reports.
The Server for sending e-mails (SMTP) section contains these customizable
fields:
·
SMTP server - insert your SMTP server address (can be an IP address or a
domain name).
·
SMPT port - specify the SMTP server port number. Default value is 25.
If your SMTP server requires authentication for sending e-mails, enter the login
details below:
·
SMTP Login - specify username.
·
SMTP Password - specify password.
Confirm all changes of the server configuration by the OK button. However, the
