
EZTouch I/O Flex
61 / 64
Setup IP Address
The
EZTouch I/O Flex
will arrive with a factory-programmed IP Address that may
need
edited to be compatible with your LAN network. Once the IP Address has
been
adjusted to the LAN, the
EZTouch I/O Flex
can receive programming
instructions
through either the serial port (COM1) connection or via the Ethernet.
Follow the
steps below to use the editing software to update the IP Address
information
though a COM port on the
EZTouch I/O Flex
.
1.
Insert a USB cable or EZ-PGMCBL programming cable. Then launch the editing
software EZ
Touch
Edit
or
.
2.
Select Edit Program OFFLINE and enter a project name (e.g. Test). Click OK.
3. Select EZ3 under Panel Family. Then select the size appropriate for your
purchased unit (6", 8" or 10").
4. Under PLC, select EZPLC as PLC Model and then select purchased PLC type
(Std, Micro or Nano).
5. Click OK to launch the editing software program.
6. The Main Project Window will then appear showing both the PLC and Panel
sides to the program. To adjust the IP Address, the Panel side will need to be
selected.
7. Click
Set-up
>
Ethernet Set up
. A dialog box will appear displaying the current
IP parameters.
Summary of Contents for 6" EZTouch I/O Flex
