ZP900 Post Scales User Instructions
39
9 Agency and sealing label positions
There are two main labels that go onto the BSQ base. The NTEP info is on one, the EU
and ROW approvals on the other. If the BSQ is part of a ZP900 system there is a third
label which is applied.
The EU/ROW label is placed on the left side of the BSQ base. This where the level
bubble is located. See placement in
The NTEP label is placed on the right side of the base. See placement in
.
When certified a verification mark sticker (certifying body supplied) is applied in the
location shown in
.
Figure 9.1 Label placement
The BSQ is sealed when necessary by using 2 seal labels, placed across the mid-seam
of the housing on opposite sides of the scale. See below for the position of one such
label.
Bubble level
Right side
Left side
ZP900 system label
NTEP label
EU/ROW label
Verification sticker
