Avery Weigh-Tronix ZM505, User Instructions

Page: 33 / 36

ZM505 Indicator User Instructions 33
6.1 Printed Preset Tare report example
Prt Tot This stands for Print Total. If enabled, during normal operation the
user can press and hold
PRINT for three seconds and the selected
print format (see Tot Fmt section below) will be sent to any port
that is configured. The display will flash Prn-tot .
Tot Fmt This stands for Total Format. This is the designated print format
number used for the accumulated totals of the current active
channel. (Format 8 is the default).
Clr Tot This stands for Clear Total. If enabled, during normal operation the
totals for the active channel will be cleared after you press and
hold of the
PRINT key for three seconds. The clearing will occur
after printing of the Totals (if enabled). The message cLr-tot will
flash on the display.
Print Select the destination the 200-channel report will be transmitted
to. Choices are:
Port 1 , Port 2 or USB . See a sample report
below.
Channel ID Gross Total Net Total Tare Total Transactions Units
1 111 1077.000000 1027.000000 50.000000 2 lb
2 0 0.000000 0.000000 0.000000 0 lb
3 0 0.000000 0.000000 0.000000 0 lb
4 0 0.000000 0.000000 0.000000 0 lb
5 0 0.000000 0.000000 0.000000 0 lb
6 0 0.000000 0.000000 0.000000 0 lb
7 0 0.000000 0.000000 0.000000 0 lb
8 0 0.000000 0.000000 0.000000 0 lb
9 0 0.000000 0.000000 0.000000 0 lb
10 1010 2966.000000 2524.000000 442.000000 3 lb
rESEt This clears the entire 200-channel database.
This completes the Supervisor menu. To return to normal mode repeatedly press the
TARE key to exit.
6.1 Printed Preset Tare report example
Tare Index Preset Tare
1 500 lb
2 0 lb
3 0 lb
4 0 lb
5 0 lb
6 0 lb
7 0 lb
8 0 lb
9 0 lb
10 0 lb