Avery Weigh-Tronix ZM505, User Instructions

Page: 32 / 36

32 ZM505 Indicator User Instructions
Supervisor menu
6 Supervisor menu
The Supervisor menu allows the setup and editing of the Preset Tare register and the
accumulation application parameters. The tare portion of the menu appears only if
Preset Tare is enabled. Refer to the Service manual.
To access the Supervisor menu enter the Supervisor password, 1793 . The ZM505
has a Preset Tare register memory which can store 10 tares.
Figure 6.1 Supervisor menu
Press and hold the SETUP key until the password entry screen appears. Enter the
Supervisor password, 1793 and press the ZERO key.
Highlight the item you wish to set and press the Enter key. The definitions of each item
in the Supervisor menu are described below.
SuPEr This is the top item in the Supervisor menu.
tArE This item appears only if Preset Tares are enabled. Use this to enter tare
weights for up to 10 Preset Tares.
Edit Use this to set the tare weight for Tare 1 through Tare 10.
Print Use this to print the tare list to your desired port or to the USB port.
See
Printed Preset Tare report example on page 33 .
rESEt Use this to clear all tares in memory.
AccuM Use this item to set the accumulation paramaters below.
Super
Tare
Edit
Tare 1 Tare 10
Accum
Prt tot Tot Fmt Clr tot
Off On
Port 1 Port 2
USB
Print Reset
Yes No
Enter
tare
weight
…
Print
Port 1
Port 2 USB
Reset
Yes No
Key in
Format #
Off On
Appears only if Preset Tare
is enabled.
If the Preset Tare list has been reset and you print the Preset Tare report the 10
memory channels will be listed but all the weights will be 0.