ZM303 Indicator User Instructions
65
7.4 Checkweighing application supervisor menu
7.
Press
SELECT
…
The current value is shown with a flashing right-most digit.
8.
Press
ZERO
to accept the current value or key in a new value and press
ZERO
to accept …
undrdiv
is displayed.
Over divisions
Check
Outputs
Under divisions
Over divisions
9.
Press
UNITS
…
oVErdiV
is displayed. Use this to set the number of divisions (0-100)
above the target weight that is still within the accept window.
10.
Press
SELECT
…
The current value is shown with a flashing right-most digit.
11.
Press
ZERO
to accept the current value or key in a new value and press
ZERO
to accept …
oVErdiV
is displayed.
Reset
Check
Outputs
Under divisions
Over divisions
Reset
12.
Press
UNITS
…
rESEt
is displayed. Use this to reset the all the checkweigher variables
to the factory defaults.
13.
Press
SELECT
…
no
is displayed.
14.
Press
ZERO
to abort the reset or press
UNITS
…
YES
is displayed.
15.
Press
ZERO
to reset the settings to factory defaults …
rESEt
is displayed.
16.
Press
TARE
…
chEcK
is displayed.
17.
Press
UNITS
…
bAttErY
is displayed. The battery menu is identical in all the
applications. Refer to step
for information on setting up the
battery.
18.
This completes the Supervisor menu for the Checkweighing application.
Repeatedly press
TARE
until the indicator returns to normal weighing mode.
The current weight value is displayed.