6
ZG310 Thermal Printer User Instructions
1.3 Electrical Installation
1.4 Pluggable Equipment
Pluggable equipment must be installed near an easily accessible socket outlet.
1.5 Wet Conditions
1.6 Routine Maintenance
Always turn off the ZG310 and isolate from the power supply before starting any routine
maintenance to avoid the possibility of electric shock.
Make sure that it is placed securely on a flat and level surface.
1.7 Installation
1.8 Power Supply Details
The ZG310 is directly powered through the power jack at the rear of the printer.
The printer is designed for direct connection to a +12V or +24V vehicle battery.
Alternatively, the user may make their own power supply arrangements as described
below.
CAUTION: The power cable must be connected to an earth-grounded electrical
outlet. The electrical supply must have a circuit breaker with an appropriate
rating to protect from over-current conditions.
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED ELECTRICIAN.
The Model ZG310 printer is not a washdown unit. Do not install near water!
DANGER: RISK OF ELECTRICAL SHOCK. NO USER SERVICEABLE
PARTS. REFER TO QUALIFIED SERVICE PERSONNEL FOR SERVICE.
