manualshive.com logo in svg

Avery Weigh-Tronix 1040/XL, User Instructions

Share
Download
Avery Weigh-Tronix 1040/XL User Instructions Download Page 20

20

Model 1040/XL User’s Manual

ING.TOL & DELAY

BAT.CNT

5.

Press 

MENU

 and 

YES

 is shown. Press 

SELECT

 key. . .

WAIT

 is displayed while clearing, then 

ALL

, 

BATCH

, or 

ACCUM

 is

displayed.

6.

Press 

GROSS

 key. . .

Unit returns to 

CLR.ACC

.

7.

Press the 

GROSS

 key to return to the gross weighing mode, or press

the 

MENU

 key to move to the next menu item.

The next menu item is 

BAT.CNT

. This stands for Batch Counter. The

counter starts at 0 and increments each time a recipe is batched. This value
is cleared each time the batched data is cleared under CLR.ACC. This
counter goes up to 999999.

Follow these steps:

1.

From the Gross mode, press and hold the 

MENU 

key for two beeps (2

sec), then release. . .

LIST 

is displayed.

2.

Press the 

MENU 

key repeatedly until. . .

bAT.CNT

 is displayed.

3.

Press the 

SELECT 

key. . .

Current batch counter is shown.

4.

Press the 

SELECT 

key. . .

bAT.CNT is shown

5.

Press the 

GROSS 

key to return to the Gross weighing mode or press

the 

MENU 

key to move to the next menu item.

ING.TOL

 stands for Ingredient Tolerance. 

DELAY 

stands for ingredient

advance Delay. These two parameters work together to make the Auto-
advance feature work. Set ingredient tolerance as a percentage (1-99) and
delay in seconds. See example below to help understand these items.

Example: Delay parameter is set to 20 seconds

Tolerance is set to 5%

When the ingredient weight being loaded falls within the tolerance

and stays within the tolerance for the time set in the delay
parameter, the indicator will auto-advance to the next ingredient.

If you undershoot the ingredient tolerance, you can advance the

ingredient manually by pressing the 

MENU

 key on the 1040. If

you overshoot, the display will alternate between 

OVR.TOL

 and

the amount overloaded until the indicator doesn’t sense motion,
then it will advance to the next ingredient.

Follow these steps to set or view the 

ING.TOL

 parameter:

Summary of Contents for 1040/XL





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands