6
3.
Feed all four inches of the backing paper
over
the peel bar and
under
the
applicator roller and the label deflector.
4.
Push the label deflector up until it snaps into place.
5. Partially
close the cover to the first position.
6.
Pull the backing paper
over
the guide roller, down to the pinch and feed
rollers.
7.
Hold the backing paper edge between the feed and pinch rollers and press
the trigger.
8.
Close the cover completely.
9.
Select
Load Supply
from the printer icon menu, choose your supply type,
and then select
Calibrate
.
R e m o v i n g S u p p l i e s i n P e e l M o d e
♦
Tear the backing paper just above the pinch roller.
♦
Open the supply cover completely.
♦
Spread the supply holder tabs apart and remove the supply roll.
♦
Carefully pull out the supply backing paper still in place between the pinch
and feed rollers.
Peel Bar
Applicator Roller
Feed Roller
(behind
Pinch Roller)
Pinch Roller
Guide Roller
(behind supply)