05/08 Rev. AB
OPERATOR’S HANDBOOK
Getting Started
9844/9854
1-17
•
Access the parameter menu:
•
Feed material until the next punch (die cut) is reached or when the button is
held down:
•
Setting the label length automatically:
After pressing the two buttons, the printer feeds the label material, until two
punches have passed the label sensor. The measured label length is
displayed and saved into parameter
PRINT PARAMETERS > Material length
. Next,
the parameter
PRINT PARAMETERS > Material type
is set to “punched.”
¯
The label length measured by this function is from label end to label end.
If material with very large punches is used, this measurement does not work
properly. In this case, measure and set the label length manually (label length
+ punch length).
Online Operation
Press the buttons indicated in black to perform the listed functions.
•
Switching to offline mode:
•
Setting the print contrast: Press
Feed
to increase and
Cut
to decrease the
print contrast.
•
Interrupting the print job: The printer finishes printing the current label.
•
Switching to offline mode while the print job is stopped:
OFFLINE x JOBS
PRINT INFO
OFFLINE x JOBS
OFFLINE x JOBS
feeding…
OFFLINE x JOBS
OFFLINE x JOBS
Manual Calibrate
OFFLINE x JOBS
198.5 mm
Displays the measured label length.
ONLINE x JOBS
OFFLINE x JOBS
ONLINE x JOBS
Print contrast
xxx%
ONLINE X JOBS
Restcount XXX
ONLINE X JOBS
Stopped XXX
a
a) The message “Stopped xxx” alternates with “Press Feed.”
ONLINE X JOBS
Stopped XXX
OFFLINE x JOBS
Prog
Feed
Feed Prog
Online
Prog
Prog
Online
