Setting Up the Printer
3-9
Adjusting the Print Position
Use this option to adjust where data prints vertically on the supply. The
range is between -99 to 99. The default is 0. Adjust the print if it is too
close to the top or bottom of the supply, or overtypes a pre-printed area.
1.
From the Printer menu, select
Print Pos
.
Print Position
+00
↵
f
+
Use
A
as shown in the following table:
↵
f
+
Press
A
to
Press
A
to
Press
A
to
Enter
Save the setting
Set the position (
+00
)
1st position
2nd position
3rd position
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
2.
When the setting you want is displayed, press
A
under
↵
to save the
setting.
You return to the Printer menu.
