Avery Dennison 9486, User Manual

Page: 9 / 26

9
2 Using the Battery
Use only the provided battery and AC/DC adapter; voltage and electrical current specifications of the
printer and battery charger must match or damage may occur.
Battery Installation
1. Insert the battery in the bottom of the printer, and ensure that you
align the battery hook properly.
2. Push the battery into the slot until you hear it snap in place.
Fully charge the battery prior to use; use the AC/DC adapter or
optional Single/Quad battery charger.
Battery Charging
Using AC/DC Adapter
1. Turn off the printer power.
2. Connect the power cord to the AC/DC adapter and
then connect AC power.
3. Open the cable port cover.
4. Connect the AC/DC adapter to the power
connector.
Battery Charging Lights
LED Charge Status Charge Time
Red LED On Charging
Green LED On Fully Charged Within 3 hours
Red LED Blinking Error Replace or Reinstall Battery