37736AA
3
IMPORTANT SAFEGUARDS
1.
Read Instructions
Read all of the safety and operating instructions before using the product.
2.
Retain Instructions
Save these instructions for future reference.
3.
Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer
as they may cause hazards, damage product and void warranty.
4.
Installation
Do not place or mount this product in or on an unstable or improperly supported location.
Improperly installed product may fall, causing serious injury to a child or adult, and damage to
the product. Use only with a mounting device recommended by the manufacturer or sold with
the product. To ensure proper mounting, follow the manufacturer's instructions and use only
mounting accessories recommended by manufacturer.
5.
Power source
This product should be operated only from the type of power source indicated on the marking
label.
Precautions
Operating
•
Before using, make sure power supply and others are properly connected.
•
While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact AvertX Customer Support.
Handling
•
Do not disassemble or tamper with parts inside the camera.
•
Do not drop or subject the camera to shock and vibration as this can damage camera.
•
Care must be taken when you clean the clear lens cover. Scratches and dust will ruin the
image quality of your camera. Do not use strong or abrasive detergents when cleaning the
camera body. Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to
remove, use a mild detergent and wipe the camera gently.
Installation and Storage
•
Do not install the camera in areas of extreme temperatures in excess of the allowable range.
-22°F ~ 140°F (-30° ~ 60°C)
•
Avoid installing in humid or dusty places. The relative humidity must be below 95%.
•
Avoid installing in places where radiation is present.
•
Avoid installing in places where there are strong magnetic fields and electric signals.
•
Avoid installing in places where the camera would be subject to strong vibrations.
•
Never face the camera toward the sun. Do not aim at bright objects. Whether the camera is in
use or not, never aim it at the sun or other extremely bright objects. Otherwise the camera
may be damaged.
