35156AA
30
WDR Level
After enabling the WDR function, you can improve
the image by adjusting the WDR level.
Note:
Use level 7 or higher when there is a high
contrast between the bright and dark areas of the
scene. In the case of low contrast, it is recommended
to disable WDR or use level 1-6.
3. To restore the default settings, click
Default
.
Smart Illumination
1. Click Setup > Image > Image and then click Smart Illumination.
2. Select the corresponding lightning type and then configure other
parameters.
Parameter
Description
Control Mode
Global Mode
: The camera adjusts IR illumination
and exposure to achieve balanced image effects.
Some areas might be overexposed if you select this
option. This option is recommended if monitored
range and image brightness are your first priority.
Overexposure Restrain
: The camera adjusts IR
illumination and exposure to avoid regional
overexposure. Some areas might be dark if you
select this option. This option is recommended if
clarity of the central part of the image and
overexposure control are your first priority.
Manual
: This mode allows you to manually control
the intensity of IR illumination.
Illumination Level
Set the intensity level of the IR light. The greater
the value, the higher the intensity. 0 means that the
IR light is turned off.
Note:
You can set this parameter only when Control
Mode is set to Manual.
3. Select the correct IR control mode and set the parameters. The
following table describes some major parameters.
4. To restore the default settings, click
Default
.
White Balance
White balance is the process of offsetting unnatural color cast in images
under different color temperatures so as to output images that best suit
human eyes.
1. Click Setup > Image > Image and then click White Balance.
2. Select a white balance mode as required. The following table
describes some major parameters.
Description
White Balance
Adjust the red or blue offset of the image:
Note:
The camera adjusts the red and blue offset
automatically according to the light condition (the color
tends to be blue).
Fine Tune
: Allow you to adjust the red and blue offset
manually.
Sodium Lamp
: The camera adjusts red and blue offset
automatically according to the light condition (the color
tends to be red).
Outdoor
: It is recommended for the outdoor scenes with
a wide range of the color temperature variation
Locked
: Lock the current color temperature settings
without adjustment.
Red Offset
Adjust the red offset manually.
Note:
You can set this parameter only when White
Balance is set to Fine Tune.
Blue Offset
Adjust the blue offset manually.
Note:
You can set this parameter only when White
Balance is set to Fine Tune.
3. To restore the default settings, click
Default
.
