NIGHT VISION
Indoor/Outdoor Bullet
Model no:
DP15IR
DP15IRV
Camera Installation & Configuration
Please carefully read these instructions before using this product.
Save this document for future use.
31543AA
1-855-2avertX
(1-855-228-3798)
www.avertx.com
Precaution
•
Please study the user manual before installation and
keep the manual for future reference.
•
Avoid shining the LED lights directly in eyes.
•
Do not install the camera on an unstable surface.
• To avoid fire or electric shock, use a proper power
source.
•
Do not disassemble the camera.
•
Stop using the camera if you see smoke or feel unusual
heat.
• Do not cut or peel the covering away from the cable.
This will eliminate weather protection and void the war
-
ranty.
Features
•
650 TV-Line Resolution
•
Digital Wide Dynamic Range
•
IR LEDs
•
IP66-rated
GENERAL SPECIFICATIONS
Model No.
DP15IR
DP15IRV
Image Sensor
1/3” Sony CCD
IP Rating
IP66
Type / Format
NTSC
Wide Dynamic Range
Digital Wide Dynamic Range
Minimum Illumination
0.1 Lux @ F1.2, 0 Lux with LEDs engaged
Day / Night
Digital Day / Night
Resolution
650 TVL
Focal Length
4mm Fixed
4mm ~
9mm Verifocal Lens
Iris Control
Auto
Auto White Balance Range
2500K ~ 9500K
Backlight Compensation
Yes
Auto Gain Control
Auto
Operating Temperature
14˚ ~ 122˚ F (-10˚ ~ 50˚C)
Heater
No
Power Consumption
6.6W Max
Input Voltage
12vDC
Weight
1.9 lbs (0.9 kg)
Dimensions
W: 4.1” (105mm) x H: 4.1” (105mm) X L: 8.9”
(226mm)*
Housing
Gray
BOX CONTENTS
• Screws (x4)
• Anchors (x4)
• Hex-head wrench
• Sunvisor screw
•
Extra video output cable
DIMENSIONS
REGULATORY COMPLIANCE
Emissions
FCC part 15, subpart B, Class A
CE: EN61000-6-4:2007
Immunity
CE: EN60130-4:1995 + A1:1998 + A2:2003
FCC COMPLIANCE
This product has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. The product generates, uses, and can
radiate radio frequency energy, and, if not installed and used in accordance with
the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this product in a residential area is likely to cause
harmful interference, in which case you will be required to correct the interference
at your own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference
that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a non-residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference with the radio or television reception, which can be deter
-
mined by turning the equipment off and on, you are encouraged to try to correct
the interference by one or more of the following measures:
1.
Reorient or relocate the antenna of the radio/television receiver.
2.
Increase the separation between this equipment and the radio/television
receiver.
3.
Plug the equipment into a different outlet so that the equipment and the
radio/television receiver are on different power mains branch circuits.
4.
Consult the dealer or an experienced radio/television technician for
additional suggestions.
*Width, Height, and Length measurements include mount and sunsheild.
