7
1.5.2.3 Connecting Devices
The DVR unit can connect up to 4 video cameras, 4 sensor devices, 1 alarm device
and output video to a TV or CRT/LCD monitor. Follow the illustration below to make
the connection:
-
Each time you change the video display output, the power must be
turned
off
and
on
to reset the DVR unit.
-
When the power cable is connected to vehicle batter, remember to stop
recording and shutdown the DVR unit to avoid running out of vehicle battery
when the vehicle engine is off.
1.5.3 Connecting the Sensor/Relay device
The Sensor and Alarm ports enable you to connect (4) sensor inputs and (1) relay
outputs. Just connect the external sensor and relay pin directly to the pinhole. Check
the table below and locate which pinhole is assigned to sensor input and relay output.
