Avermedia AVerAI EN713-AAE9, Manual

Page: 7 / 34

Trademark Acknowledgement
ESD Warning
AVerMedia
acknowledges all the trademarks, registered trademarks, and/or copyrights
referred to in this document as the property of their respective owners. Not listing all
possible trademarks or copyright acknowledgments does not constitute the lack of
acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this
document.
Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When
handling any circuit board assemblies including AVerMedia AVerAI products, it is highly
recommended that ESD safety precautions can be observed. ESD safe best practices can
include, but are not limited to the following ones.
1.
Leave the circuit board in the antistatic package until it is ready to be installed.
2.
Use a grounded wrist strap when handling the circuit board. At a minimum, you
need to touch a grounded metal object to dissipate any static charge, which may be
present on you.
3.
Avoid handling the circuit board in the carpeted areas.
4.
Handle the board by the edges and avoid the contact with the components.
5.
Only handle the circuit boards in ESD safe areas, which may include ESD floor and/or
table mats, wrist strap stations, and ESD safe lab coats.
7